Two-component self-emerging mortar consisting of component A - synthetic acrylic resin and component B - powder based on special cement, appropriate aggregates and metal fibers.

Features

• self-leveling mortar - does not require smoothing
• excellent adhesion to the concrete substrate
• high impact resistance
• high resistance to abrasion and ultraviolet radiation
• fast curing, after use, can be used after 8 h for pedestrian traffic, after 24 h for light traffic, after 72 h for heavy traffic

Application

• can be used for repairing concrete surfaces on large horizontal surfaces and on a gentle slope
• flooring in factory halls, warehouses, workshops, parking lots, garages
• for inside and outside
• as a maintenance layer secured with Maxepox Morter resin track in mobile tanks in wastewater treatment plants wastewater in

Technical data

• grey colour
• mixing ratio 19.2-20%
• fluidity, 5 x 3 cylinder (drop) 135 mm
• wear time 20 C 30-40 min
• setting time 20 C: initial 1-2 h; final 2–3 h
• putting into service, 20 C: pedestrian traffic 8 hours; light vehicular traffic 48 hours; heavy vehicle traffic 72 h
• the density of the hardened product 2.1 0.05 g / cm ²
• flexural strength: 6.7 MPa after 7 days; after 28 days, 11.4 MPa, compressive strength: after 7 days, 32.5 MPa; after 28 days 51.6 MPa surface hardening SH 88.4 N / mm ²
• impact resistance 6.87 / 700 N m / mm
• Bohme abrasion resistance of 4.3 cm ^3/50 cm ²
• adhesion to concrete after 28 days> 2 MPa
• approximate consumption 1.8 kg / m ² / mm
• package 25 kg bag